If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Cerium Oxide – What’s it all about? Cerium oxide is either a pale yellow or yellowish-brown powder. The bulk density is 7.13g/cm3, and the melting point at 2397. The boiling point at 3500 is around 3500. The substance is insoluble with water and alkali but somewhat soluble with acid. To make cerium trioxide, heat can reduce cerium oxide to 2000°C at 15MPa. Cerium oxide turns slightly yellowish or reddish if it is exposed to temperatures between 2000°C & 5MPa. It is widely used in polishing materials and as catalysts or catalyst carriers (auxiliary agent), for ultraviolet absorbers. It can also be used to fuel cell electrolytes. It can also be used to make electronic ceramics.

Daily Life

Antifogging Glass Agent Wet or rainy weather can make it easy for moisture to form on glass products like building glass, windshields, rearview lenses, spectacle lenses, and more. This is due to humidity. Water droplets that form on glass substrate in the shape of small hemispheres can cause a prism-like reflection effect. It also affects visibility and light transmittance. Fogging glass can lead to inconveniences in people’s lives and may even pose a danger to their safety. The visibility of light transmittance and mirror imaging will be affected by particles like dust or oil. This is why anti-fogging can be closely linked to both work and personal life. People use many different methods to fix this problem. It is common to use the antifogging technique, which is simple and easily applied. A variety of solvents and wetting agents are used in surfactant antifogging agent. While this anti-fogging agents is relatively easy to make, they are difficult to lose due to water condensation on the glass. The general anti-fog period is between 2-7 days. Presently, research has shown that adding oxides to anti-fogging agents can have a positive effect on the results. Photocatalytic TiO2 is one of the most popular anti-fog films. Nano-titanium dioxide can diffuse small water droplets onto the glass surface and create a uniform film. This surface is not susceptible to light scattering fog. It can also maintain high transparency levels without burning. Use safely This anti-fog material is safe. It has good abrasion resistance as well as abrasion and solvent resistance. The next step is SiO2 antifog and TO2/SiO2 compog film. But, this process can be complicated and harsh.

Nano-cerium Oxide Glass Antifogging Medic

Its special surface effects and volume effects determine the special chemical properties of nanocerium oxide particles and their special effects. This includes enhancing the surface adsorption of nano-cerium oxide particles, increasing chemical reaction activity and surface active centres, as well as increasing surface activity. It also has high catalytic efficiency. The light it emits has both a catalytic and hydrophilic function. An ultrafine CeO2 particle can be added to anti-fogging. This will increase the agent’s surface adsorption. Second, the CeO2 can absorb ultraviolet light. The third is that it can photocatalyze any organic present on the glass.

A new form of cerium dioxide glass anti-fogging agents with good antifogging effects, long antifogging times, stability, safety, harmless and easy production has been developed using nano-rare Earth ceriumoxid as a raw materials.

Nano-cerium Oxide

preparation process

Add a little cerium oxide to a cup of concentrated HNO3 to dissolve. Make a 0.5mol/LCeNO3)3 solution by slowly heating the water. Then add H2O2 (in a ratio 1:1) to it. After it has boiled, heat it to 180°C. A large quantity of brown aerogel will be emitted, which can then be burned to produce nano-CeO2 dust.

The Preparation Method Of Nano Cerium Oxide Antfogging Agent

Use appropriate dispersants, additives or surfactants to combine the antifogging agent. Conduct experiments using the single factor optimization to find the most effective formula. Kmpass advanced materials Tech Co., Ltd (Kmpass ), a cerium powder company with 12+ years in chemical products development and research, is Kmpass . We can provide high-quality cerium oxide powder. Please contact us to send an enquiry.
Inquiry us