What is it? Molybdenum Silicide ? Molybdenum Disilicide is an organic compound that has the chemical composition MoSi2. It is a grey metallic solid. Although insoluble in most acids it is soluble in nitric acid and hydrofluoric acid. The radii of these two atoms do not differ much, and their electronegativities are very close. They also have properties that are similar to metals and ceramics. Molybdenum Disilicide can be used as an electrically conducting material. A passivation layer made of silicon dioxide can also be created on the surface at high temperatures to prevent further oxidation. It is used to make high-temperature antioxidation coating materials, integrated electrode films and structural materials.
Molybdenum Siicide:
MoSi2 (intermediate phase) is the most silicon-rich in the MoSi binary alloy system. It’s a Dalton type intermetallic compound of fixed composition. This high-temperature material has great performance because of its dual properties of ceramics as well as metal. Excellent high temperature resistance to oxidation, it has a oxidation resistant temperature of 1600. This is equivalent in SiC. It also has a moderate density (6.24g/cm3), low thermal expansion coefficient (8.10-6K-1), good electrical conductivity, high brittle-ductile temperature (1000) and is below ceramic-like hardbrittleness. It is soft and has the appearance of metal. MoSi can be used in integrated circuits, heating elements and high temperature antioxidation coatings.
MoSi2 consists of silicon and molybdenum bonded with metal bonds. In MoSi2, silicon and silicon are also bonded via covalent bonds. Molybdenum Disilicide is a gray tetragonal crystalline. It is insoluble within common mineral acids (including aqua regia), however, it is easily soluble in mixed acids nitric acid or hydrofluoric acid. It can be used to heat elements in high-temperature (1700) environments due to its high resistance to high-temperature oxygenation.
An oxidizing atmosphere forms a protective layer on the surface dense quartz glass (SiO2) that has been heated to high temperatures. This prevents continuous oxidation. SiO2 fused to form protective films when temperatures exceed 1700degC. It loses its protective power due to the act of expanding its surface. The oxidant acts on the element and forms a protective film. It is important to note that this element can not be used for prolonged periods in temperatures between 400 and 700 degrees C due to its strong oxidation at lower temperatures.

Molybdenum Silicide Properties
Other Titles	molybdenum disilicide (MoSi2 Powder)
No.	12136-78-6
Combination Formula	MoSi2
Molecular Weight	152.11
Appearance	Gray to Black Powder
Melting Point	1900-2050 degC
Boiling Point	N/A
Density	6.23-6.31 g/cm3
Solubility of H2O	N/A
Electrical Resistivity	0.0000270 – 0.0000370 ohm-cm
Specific heat	0.437 J/g-degC (23 degC)
Tensile Strength	185 MPa
Thermal Conductivity	66.2 W/m-K (23 degC)
Thermal Expansion	N/A
Vickers Hardness	900-1200
Young’s Modulus	N/A
Exact	153.859261

Molybdenum Silicide:
Molybdenum disilicide can be used in high-temperature anti-oxidation coatings, electric heating elements and integrated electrode films.
1. Energy chemical industry: Electric heating elements, high heat exchangers of nuclear reactor devices, gas burners. High temperature thermocouples with their protective tubes. Melting vessels and crucibles are used to melt sodium, lithium and other metals.
2. MoSi2 and other reactive metal silicides, such as WSi2, TaSi2, Ti5Si3, WSi2, TaSi2, etc. are used in the microelectronics sector. important candidates materials for large-scale integrated circuit gates and interconnect films.
3. Aerospace industry. It has been extensively and thoroughly researched and successfully applied as a high temperature antioxidation coating material. This material is especially useful for components of turbine engines such as blades or impellers.
4. Automobile industry: engine parts, turbocharger rotors and valve bodies for automobiles.
Molybdenum Silicide’s main supplier
Tech Co., Ltd. () is a professional silicide for Over 12 years’ experience in chemical product development and research. We accept credit cards, T/T and West Union payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
You can find high-quality powdered boron carbide here Please contact us Send an inquiry