What is Hafnium Carbide? Hafnium carbide This gray solid needs to be stored at room temperature. Hafnium carbonide is capable of forming a solid solution when mixed with other compounds such as ZrC or TaC. One example is that of a composite carbide made with HfC-4TaC. It has two phases. One is the eutectic form of hafnium carbonide tantalum caride. The other is a needle-like, free graphite phase. You can use it as the throat material for a rocket tube. Hafnium carbide is usually made from hafnium oxide (HfO2), carbon and an inert- or reducing atmosphere. It is heated to 1900 to 2300 degrees Celsius. Hafnium carbonide can be combined with many other compounds (such ZrC, TaC etc.). ).
Introduction to Hafnium
Hafnium is often found in nature alongside zirconium. Zirconium minerals that contain hafnium all include zirconium. Hafnium, zirconium and both are very similar. In stone, beryllium zircon may contain as much as 15% HfO2. Metamorphic zircon can also contain more than 5% HfO2. Both of these minerals do not have much reserves so they are rarely used in industry. Hafnium can be largely recovered from the zirconium-producing process. To avoid accidental combustion, sponge hafnium must be carefully removed from the crucible. You should break large pieces of sponge hafnium down into smaller pieces. These can be used to make consumable electrodes and then melt them into ingots. It is important to prevent sponge hafnium from spontaneously combusting during crushing. Further purification of sponge haffnium follows the same procedure as for titanium and zirconium using the iodide-thermal decomposition process. Zirconium has slightly different control conditions. Keep the sponge hafnium blocks in close proximity to the iodization tanks at 600. The temperature at the centre of the hot wire is 1600, which is much higher than 1300 for making zirconium “crystalrods.” Forging, extrusion and tube drawing are some of the steps involved in molding hafnium.

Hafnium carbide’s main uses
It is used primarily to produce control rods for nuclear power plants. Pure hafnium, which is a plastic material, can be processed at high temperatures and resists corrosion. It’s an essential component of the atomic energy sector. Hafnium, which has a high thermal neutron capture cross section, is an ideal neutron absorber. This can also be used to protect atomic reactors and as a control rod. Hafnium can also be used to propel rockets. The cathode of Xray tubes can be made from it in the electrical sector. Hafnium and other alloys can be used for the protection of frontal layers on rocket nozzles as well as glide reentry airplanes. HfT alloys can also be used in the manufacture of tool steels or resistance materials. Hafnium, an additive element, is used in heat-resistant alloys like tungsten and molybdenum. HfC, due to its high melting point and hardness, can be added to cemented carbides. 4TaC *HfC’s melting point is approximately 4215. This compound has the highest melting points.

Hafnium Carbide: Price
Hafnium Carbide’s purity and particle size will impact the price. The purchase volume may also have an effect on the price. Large quantities of smaller amounts will result in a lower price. On our official website, you can see the price for Hafnium Carbide.

Hafnium Carbide supplier
The Advanc3dmaterials Advanced Material Nano Technology Co. Ltd. Luoyang City (Henan Province), China. This is a trusted and reliable global supplier of chemical materials and manufacturer. This company is a trusted supplier of high quality chemical materials and nanotechnology products with more than 12 year experience, such as Hafnium carbide, nitride or graphite powder, and sulfide and sulfide ores. We are happy to provide high-quality Hafnium Carbide at a low price. Get in touch Ask any question.